====== DS-2CD2443G2-IW-W ======

[[https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Wi-Fi-Series/ds-2cd2443g2-iw--w-/]]

Shipped firmware:
  * Firmware Version V5.3.8 build 241123
  * Encoding Version V7.0 build 240204

Updated firmware:
  * V5.3.8build 251219

===== WARNING =====

**This is a consumer camera designed to work only with Hik app and Hik cloud.**

Cons:
  * No WEB UI ("Access Error: 404 -- Not Found")
  * supported by SADP
  * supported by iVMS-4200 and all configuration menu is available
  * supported by Android Hik-app
  * not supported by Hikvision NVR
    * possible usage as generic RTSP camera

  * http port 80 available, but probably used only for ISAPI
  * 

Pros:
  * rtsp stream (main and sub) available on 544 port


Source:
  * [[https://www.facebook.com/groups/573727906297010/posts/2536432936693154/]]
  * 


Web page shows:
<code>
Access Error: 404 -- Not Found

Can't locate document: /
</code>

===== RTSP streams =====

Main stream:

H.265 2560x1440
<code>
rtsp://user:pass@192.168.0.2/streaming/channels/101
rtsp://user:pass@192.168.0.2/streaming/channels/1
</code>

H.265 768x432:
<code>
rtsp://user:pass@192.168.0.2/streaming/channels/102
</code>

===== Factory reset =====

Press button under side cover until camera says "reset successfully".

===== first run =====

  * First configure using SADP then
  * Possible to add by QR code from HIK-connect app
  * to fully configure camera (video parameters / WiFi network / etc) use ''iVMS-4200''. There is detailed menu configuration.