====== HP Microserver N36L Gen 7 ======

  * Athlon II Neo N36L (1.3GHz)
    * TDP 15W / K10 Champlain / 45 nm / 2x 1MB L2 Cache
    * Release date: 2010
    * [[https://en.wikipedia.org/wiki/List_of_AMD_Athlon_II_processors#Athlon_II_Neo_mobile_processors_(Phenom_II-based)|Athlon II Neo mobile processors (Phenom II-based)]]
  * Optional: HPE MicroServer remote access card kit 615095-B21
  * PCIe:
    * Slot 1: PCI-Express Gen 2 x16 (physical and electrical x16). 25W limit
    * Slot 2: PCI-Express Gen 2 x1 (physical and electrical x1).
    * Slot 2-2: Special slot PCIe x4 designated only for optional management card: HP MicroServer Remote Access Card (IPMI).

===== ethernet NC107i =====

**No support of Jumbo-frames, maximum MTU is 1500**

<code>
03:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme BCM5723 Gigabit Ethernet PCIe (rev 10)
        Subsystem: Hewlett-Packard Company NC107i Integrated PCI Express Gigabit Server Adapter
     	Kernel driver in use: tg3
	Kernel modules: tg3
</code>

<code>
[    4.701206] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM95723) rev 5784100] (PCI Express) MAC address 78:ac:c0:fb:f1:06
[    4.701312] tg3 0000:03:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    4.701363] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    4.701411] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
</code>