====== Cisco Switches ====== * WS-C3560G-24PS * WS-C3560G-48PS-E * WS-C3560G-48PS-S Features: * ''G'' gigabit * ''X'' Dual Redundant Modular Power Supplies Power: * ''PS'' PoE capable on all ports, but guaranteed 15.4w PoE to only 24 ports in a first-come-first-serve. * ''PF'' PoE capable, FULL power. Guaranteed 15.4w PoE to all ports. until-full basis. * ''T'' means you have a non-PoE switch. * ''TS'' means non-PoE with SFP ports. Suffixes: * ''-E'' Enerprise (L3 switch) aka ''IP Services feature set'' * advanced L3 * EIGRP * OSPF * BGP * PIM * IPv6 routing * OSPFv3 * EIGRPv6 * * ''-S'' ''IP Base feature set'' * + basic L3 * + StackPower * + MACsec * + QoS * + ACL * ''-L'' ''LAN Base feature set '' * L2 only * security features * ACL * DHCP snooping * 802.1X * more QOS features * 128 --> 256 VLANs * ''-S' / ''-LL'' in older Catalyst i.e. 2960. Standard Layer 2 IOS feature set (''LAN Lite'') ===== Stable IOS ===== For legacy switches: * 15.2(4)E10 * 15.0(2)SE12 * 12.2(55)SE13 ===== 3750 vs 3560 ===== * 3560's and 3750 are eventually the same switches.The only difference is that 3750's switches are based on stacking capabilties. They have a High-Speed stacking bus to give stacking capabilties. * Switching capacity (ignoring stack ring) is the same * 3750X can be stacked 2x (unidirectional 32Gbit) * the 3750X can also share power across stack member ===== C3850 ===== * WS-C3850-48T-L + 4xSFP+ module. * length 45cm ! * stacking 480Gb/s ===== WS-C4948-10GE-S ===== * 2 x X2 slot * CVR-X2-SFP10G (aka Cisco OneX Converter Module) for SFP+ ===== expansion module2 ===== * X2 - older (Catalyst 3750-E, 3560-E, older 4500 / 4600) - it is only "converter" * CVR-X2-SFP10G (Adapter OneX) * one X2 slot = one SFP+ port * Catalyst 3750-X / 3650-X only - network module (connected to dataplane) * C3KX-NM-10G * 2x 1GB SFP or * 2x 1GB SFP or 10GP SFP+ (dual role) * C3850 - network module (connected to dataplane 480gbit) * C3850-NM-2-40G 2x40G QSFP+ * C3850-NM-2-10G