meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
cctv:hik:cameras:ds-2cd2443g2-iw-w [2026/02/11 16:43] – niziakcctv:hik:cameras:ds-2cd2443g2-iw-w [2026/08/24 11:16] (current) – niziak
Line 1: Line 1:
 ====== DS-2CD2443G2-IW-W ====== ====== DS-2CD2443G2-IW-W ======
 +
 +{{.:pasted:20260824-110902.png}}
  
 [[https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Wi-Fi-Series/ds-2cd2443g2-iw--w-/]] [[https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Wi-Fi-Series/ds-2cd2443g2-iw--w-/]]
  
-Firmware Version V5.3.8 build 241123 +Shipped firmware: 
-Encoding Version V7.0 build 240204+  * Firmware Version V5.3.8 build 241123 
 +  * Encoding Version V7.0 build 240204 
 + 
 +Updated firmware: 
 +  * V5.3.8build 251219
  
 ===== WARNING ===== ===== WARNING =====
Line 12: Line 18:
 Cons: Cons:
   * No WEB UI ("Access Error: 404 -- Not Found")   * No WEB UI ("Access Error: 404 -- Not Found")
-  * Not possible to provision using SADP+  * supported by SADP
   * supported by iVMS-4200 and all configuration menu is available   * supported by iVMS-4200 and all configuration menu is available
   * supported by Android Hik-app   * supported by Android Hik-app
Line 23: Line 29:
 Pros: Pros:
   * rtsp stream (main and sub) available on 544 port   * rtsp stream (main and sub) available on 544 port
 +  * Quite good quality and brightness in dark room
 +  * Quite good angle
 +  * WiFi - can be placed temporary everywhere (works with generic 12V DC supply)
 +  * PoE
  
  
Line 28: Line 38:
   * [[https://www.facebook.com/groups/573727906297010/posts/2536432936693154/]]   * [[https://www.facebook.com/groups/573727906297010/posts/2536432936693154/]]
   *    * 
- 
-Factory reset: press button under side cover until camera says "reset successfully". 
  
  
Line 53: Line 61:
 rtsp://user:pass@192.168.0.2/streaming/channels/102 rtsp://user:pass@192.168.0.2/streaming/channels/102
 </code> </code>
 +
 +===== Factory reset =====
 +
 +Press button under side cover until camera says "reset successfully".
  
 ===== first run ===== ===== first run =====
  
- * Possible to add by QR code from HIK-connect app +  * First configure using SADP then 
- * to change IP address, WiFi network etc use ''iVMS-4200'' - there is detailed menu configuration+  * Possible to add by QR code from HIK-connect app 
 +  * to fully configure camera (video parameters / WiFi network / etc) use ''iVMS-4200''. There is detailed menu configuration.