meta data for this page
  •  

This is an old revision of the document!

DM8000HD PVR

MIPS32EL

https://dreambox.de/ https://dreamboxupdate.com/

STOP

Trzymając strzałkę w dół, włączamy power.

ERR01: NO CA FOUND

Po wgraniu openpli-enigma2-7.2star-dm8000_Japhar_v6_GStreamer_1.17.0.1_20190927.nfi

Connect DM using null modem serial cable. 

BCM97400
AB
FFFFFFFF
1s
Sync=1
LLMB=1
L2=1
RAC_I=1
RAC_D=1

Copy Code...34TUCV

(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM8000
FIRST STAGE 1.10 {BO23456}

2ND STAGE OK, build #84J(2015-07-01)

0.000  - BCM board setup
Configure MEMC1_2........ Done
0.039  - fp init
FP version 7 detected
0.106  - ca init
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND

Wersja SSL: #84J

Ściągnąć https://dreambox.de/en/index.php/downloadcenter/#universal-dreamup. Uruchomić DreamUp, wybrać port COM, wybrać adresacje IP (upload po serialu trwa 3h!) i nacisnąć CONNECT. Teraz można włączyć dekoder. Program wgra flash-loader i poprzez niego będzie mógł wgrać obraz .nfi.

Po wgraniu openpli-7.1-release-dm8000-20191007.nfi DM8000 second stage loader #84 (2011-09-01) I nie startuje.

Wgranie oryginału dreambox-image-dm8000-20170216.nfi działa.

Próba z newenigma: https://feed.newnigma2.to/daily/images/newnigma2-ipk-weekly-dm8000-04_10_2019.nfi https://board.newnigma2.to/wbb4/index.php/Board/49-DM8000/

  • Sprawdzenie wersji SSL: 
    opkg list | grep secondstage

opkg install http://download.blue-panel.com/gemini3/g3_wizard