http://192.168.180.206:8001/ 2026-04-05T01:01:14+00:00 http://192.168.180.206:8001/ http://192.168.180.206:8001/_media/wiki:dokuwiki.svg text/html 2020-11-30T09:42:52+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/hw:nsa310:debian?rev=1606729372&do=diff Debian References OpenWRT packages: <http://bartekk.pdg.pl/openwrt/> <http://forum.nas-central.org/viewtopic.php?f=249&t=5145> <http://eko.one.pl/?p=openwrt-nsa310> <https://sites.google.com/site/realblades/misc/debian-on-zyxel-nsa310> <http://linuxwiki.de/ZYXEL%20NSA-310#Debian_Installation> <http://openrouter.info/forum/viewtopic.php?f=19&t=1581&start=80> Preparation First install Debian 6 (squeeze). Put on FAT formatted pendrive: initrd.gz uImage-3.2 uImage-3.5.1 then boot from pend… text/html 2021-01-20T18:35:47+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/hw:nsa310:encrypted_fs?rev=1611167747&do=diff Encrypted FS Encrypted partition apt-get install cryptsetup-bin Enable HW acceleration. Which is a bit slower than software :P NOTE: From Kernel 4.2 cesa driver was completely rewritten to support DMA, and old mv_cesa driver was removed in kernel 4.15 text/html 2021-06-12T08:20:48+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/hw:nsa310:p910nd?rev=1623486048&do=diff p910nd print server Use Zyxel NAS with Debian as print server for USB printer. With Samsung ML printer. Checks # dmesg [168899.143698] usb 1-1.3: new full-speed USB device number 3 using orion-ehci [168899.255194] usb 1-1.3: New USB device found, idVendor=04e8, idProduct=3292 [168899.262213] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [168899.269743] usb 1-1.3: Product: ML-1640 Series [168899.274343] usb 1-1.3: Manufacturer: Samsung Electronics Co., Ltd. [168899.28063… text/html 2021-01-20T16:42:50+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/hw:nsa310:poe?rev=1611160970&do=diff Zyxel NSA310 on PoE DC input socket has 12V 2.5A specification. It runs correctly on PoE adapter (unspliters :). Switch shows only around 13W consumption (in ideal conditions it means 1,08A at 12V) Sometimes, after few days NSA310 stops responding with: text/html 2020-11-06T10:43:19+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/hw:nsa310:serial_console?rev=1604659399&do=diff Serial console Serial converter 3,3V level converter 115200 8N1 1 2 3 4 5 Vcc RX TX nc GND __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** MARVELL BOA… text/html 2020-07-03T07:43:01+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/hw:nsa310:start?rev=1593762181&do=diff Zyxel NSA310 Technical info Fan: 12V / 4200RPM / 4,11CFM / 0,06A / 3pin (one pin for RPM feedback) 5 two color LEDS: * SATA1 * SATA2 * System * USB * Copy 3 Buttons: * POWER (on front) * COPY (on front) * OPTION (on the back) Original system text/html 2020-07-03T07:43:06+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/hw:nsa310:u-boot?rev=1593762186&do=diff U-Boot [Full startup log] __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** MARVELL BOARD: RD-88F6281A LE U-Boot 1.1.4 (Jun 8 2011 - 18:48:37) Marvell version: 3.4.19 …