http://192.168.180.206:8001/ 2026-05-15T02:47:01+00:00 http://192.168.180.206:8001/ http://192.168.180.206:8001/_media/wiki:dokuwiki.svg text/html 2021-07-07T13:42:38+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/linux:sw:nut:cgi?rev=1625665358&do=diff nut-cgi apt-get install nut-cgi For dedicated nut host set apache2 default root: <VirtualHost *:80> DocumentRoot /usr/share/nut/www/ ... MONITOR UPS3000XL@localhost "Smart-UPS 3000 XL" a2enconf serve-cgi-bin a2enmod alias cgid apachectl configtest apachectl graceful text/html 2026-04-06T18:21:47+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/linux:sw:nut:eaton_ellipse_650?rev=1775499707&do=diff UPS Eaton Ellipse ECO 650 VA USB-B socket # lsusb Bus 001 Device 008: ID 0463:ffff MGE UPS Systems UPS apt install nut-server nut-cgi USBHID-UPS(8): " SUPPORTED HARDWARE usbhid-ups brings USB/HID UPS monitoring to NUT on all platforms supporting USB through libusb. It should detect any UPS that uses the HID Power Device Class, but the amount of data will vary depending on the manufacturer and model. text/html 2021-07-07T12:34:56+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/linux:sw:nut:snmp?rev=1625661296&do=diff NUT with SNMP UPS APC UPS 3000XL + AP9617 UPS Network Management Card apt-get install nut-snmp UPS Network Management Card Enable SNMP v1 Read only access for community 'public' NUT config UPS config [UPS3000XL] driver = snmp-ups port = 192.168.64.22 desc = "Smart-UPS 3000 XL"