http://192.168.180.206:8001/ 2026-05-13T05:19:34+00:00 http://192.168.180.206:8001/ http://192.168.180.206:8001/_media/wiki:dokuwiki.svg text/html 2025-08-12T10:28:48+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/network:switches:8021p?rev=1754994528&do=diff 802.1p PCP value Priority Acronym Traffic types 1 0 (lowest) BK Background 0 1 (default) BE Best effort 2 2 EE Excellent effort 3 3 CA Critical applications text/html 2026-05-04T09:39:30+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/network:switches:cisco?rev=1777887570&do=diff Cisco Switches * WS-C3560G-24PS * WS-C3560G-48PS-E * WS-C3560G-48PS-S Features: * G gigabit * X Dual Redundant Modular Power Supplies Power: * PS PoE capable on all ports, but guaranteed 15.4w PoE to only 24 ports in a first-come-first-serve. text/html 2025-03-06T19:55:30+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/network:switches:dscp?rev=1741290930&do=diff DSCP <https://en.wikipedia.org/wiki/Differentiated_services> DSCPDSCP val realtimeCS432 critical dataAF2118 videoAF4134 VoiceEF46 text/html 2022-01-20T13:13:03+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/network:switches:ws-c3560g?rev=1642684383&do=diff WS-C3560G ROMMON / bootloader Unplug the switch power cord, and press the switch Mode button while reconnecting the power cord. You can release the Mode button a second or two after the LED above port 1X goes off. You should then see the bootloader Switch: prompt. The bootloader performs low-level CPU initialization, performs POST, and loads a default operating system image into memory. text/html 2026-05-04T11:29:24+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.180.206:8001/network:switches:ws-c4948-10ge-s?rev=1777894164&do=diff WS-C4948-10GE-S This switch has dedicated mgmt ethernet port. The dedicated management port cannot route traffic to network ports. It is exclusively for management. The management port operates in a separate routing domain called mgmtVrf enable configure terminal Switch(config)# interface fa1 Switch(config-if)# vrf forwarding mgmtVrf Switch(config-if)# ip address <ip_address> <subnet_mask> Switch(config-if)# no shutdown Switch(config-if)# exit