meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
hw:server:aoostar_r7 [2024/12/06 07:47] – niziakhw:server:aoostar_r7 [2025/06/11 14:47] (current) – niziak
Line 23: Line 23:
   * 2 x USB2.0   * 2 x USB2.0
  
-Very loud bottom fan, 2 pin only, connected to 4pin connector on MB. +====== BIOS ====== 
-  * EVerflow Model: R1292215BL + 
-  * 92 x 92 x 16 [mm] +2.22.1282 
-  * 12V / 0.20A + 
-  * Replacement [[https://noctua.at/en/products/fan/nf-a9x14-pwm|Noctua NF-A9x14 PWM]] +<code> 
-    * 12V / 1.32W / 0.11A +AR5000-MI2 0.22 x64 
-    * 92 x 92 x 14 [mm] +08/02/2024 13:33:03 
-    * 19,9 dBa +</code> 
-    * 50.5 CFM + 
-    * 2200 rpm+File found on Internet: {{ :hw:server:wtr_r7_5825u_bios.rar |}}, contains folder ''AR5000-MI2_231215A''. Not tried. 
 + 
 +Aoostar's official BIOSes [[https://aoostar.com/pages/drives-systems|DRIVERS & SYSTEMS]] 
 +There is a file ''WTR R7 5825U BIOS .rar''
  
 ====== ECC RAM ====== ====== ECC RAM ======
Line 38: Line 41:
 Running on ''Hynix DDR4 32 GB 3200MHz CL22 (HMAA4GS7AJR8N-XN)''. But no EDAC driver loaded in Kernel. Running on ''Hynix DDR4 32 GB 3200MHz CL22 (HMAA4GS7AJR8N-XN)''. But no EDAC driver loaded in Kernel.
  
 +Enable ECC in BIOS:
 +  * ''Advanced'' --> ''AMD CBS'' --> ''UMC Common Options'' --> ''DDR4 Common Options'' --> ''Common RAS'' --> ''ECC Configuration'' --> ''DRAM ECC Enable'' --> Enabled
  
 ====== Linux ====== ====== Linux ======