meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
hw:server:aoostar_r7 [2025/01/11 20:09] – niziakhw:server:aoostar_r7 [2025/06/11 14:47] (current) – niziak
Line 22: Line 22:
   * 2 x USB3.0   * 2 x USB3.0
   * 2 x USB2.0   * 2 x USB2.0
- 
-Very loud bottom fan, 2 pin only, connected to 4pin connector on MB. 
-  * EVerflow Model: R1292215BL 
-  * 92 x 92 x 16 [mm] 
-  * 12V / 0.20A 
-  * Replacement [[https://noctua.at/en/products/fan/nf-a9x14-pwm|Noctua NF-A9x14 PWM]] 
-    * 12V / 1.32W / 0.11A 
-    * 92 x 92 x 14 [mm] 
-    * 19,9 dBa 
-    * 50.5 CFM 
-    * 2200 rpm 
  
 ====== BIOS ====== ====== BIOS ======
 +
 +2.22.1282
  
 <code> <code>
Line 40: Line 31:
 08/02/2024 13:33:03 08/02/2024 13:33:03
 </code> </code>
 +
 +File found on Internet: {{ :hw:server:wtr_r7_5825u_bios.rar |}}, contains folder ''AR5000-MI2_231215A''. Not tried.
 +
 +Aoostar's official BIOSes [[https://aoostar.com/pages/drives-systems|DRIVERS & SYSTEMS]]
 +There is a file ''WTR R7 5825U BIOS .rar''
  
 ====== ECC RAM ====== ====== ECC RAM ======
Line 45: Line 41:
 Running on ''Hynix DDR4 32 GB 3200MHz CL22 (HMAA4GS7AJR8N-XN)''. But no EDAC driver loaded in Kernel. Running on ''Hynix DDR4 32 GB 3200MHz CL22 (HMAA4GS7AJR8N-XN)''. But no EDAC driver loaded in Kernel.
  
 +Enable ECC in BIOS:
 +  * ''Advanced'' --> ''AMD CBS'' --> ''UMC Common Options'' --> ''DDR4 Common Options'' --> ''Common RAS'' --> ''ECC Configuration'' --> ''DRAM ECC Enable'' --> Enabled
  
 ====== Linux ====== ====== Linux ======