meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
hw:server:aoostar_r7 [2025/01/11 20:23] – niziakhw:server:aoostar_r7 [2025/06/11 14:47] (current) – niziak
Line 23: Line 23:
   * 2 x USB2.0   * 2 x USB2.0
  
-===== FANs =====+====== BIOS ======
  
-Very loud bottom fan, 2 pin only, connected to 4pin connector on MB. +2.22.1282
-  * EVerflow Model: R1292215BL +
-  * 92 x 92 x 16 [mm] +
-  * 12V / 0.20A +
-  * Replacement [[https://noctua.at/en/products/fan/nf-a9x14-pwm|Noctua NF-A9x14 PWM]] +
-    * 12V / 1.32W / 0.11A +
-    * 92 x 92 x 14 [mm] +
-    * 19,9 dBa +
-    * 50.5 CFM +
-    * 2200 rpm +
- +
-Default BIOS for FANs PWM: +
-  * CPU Fan: Enabled +
-    * Fan Off(0x68) 30 +
-    * Fan Start(0x69) 35 +
-    * TFull Speed(0x6A) 92 +
-    * Start PWM(0x6B) 40 +
-    * Automatic Mode Control (0x6C) 2 +
-    * Delta Temperature(0x6D) 1 +
-  * System Fan & System Fan 2 +
-    * Fan Off(0x70) 20 +
-    * Fan Start(0x71) 25 +
-    * TFull Speed(0x72) 80 +
-    * Start PWM(0x73) 130 +
-    * Automatic Mode Control (0x74) 4 +
-    * Delta Temperature(0x75) 1 +
- +
- +
- +
-====== BIOS ======+
  
 <code> <code>
Line 63: Line 34:
 File found on Internet: {{ :hw:server:wtr_r7_5825u_bios.rar |}}, contains folder ''AR5000-MI2_231215A''. Not tried. File found on Internet: {{ :hw:server:wtr_r7_5825u_bios.rar |}}, contains folder ''AR5000-MI2_231215A''. Not tried.
  
 +Aoostar's official BIOSes [[https://aoostar.com/pages/drives-systems|DRIVERS & SYSTEMS]]
 +There is a file ''WTR R7 5825U BIOS .rar''
  
 ====== ECC RAM ====== ====== ECC RAM ======
Line 68: Line 41:
 Running on ''Hynix DDR4 32 GB 3200MHz CL22 (HMAA4GS7AJR8N-XN)''. But no EDAC driver loaded in Kernel. Running on ''Hynix DDR4 32 GB 3200MHz CL22 (HMAA4GS7AJR8N-XN)''. But no EDAC driver loaded in Kernel.
  
 +Enable ECC in BIOS:
 +  * ''Advanced'' --> ''AMD CBS'' --> ''UMC Common Options'' --> ''DDR4 Common Options'' --> ''Common RAS'' --> ''ECC Configuration'' --> ''DRAM ECC Enable'' --> Enabled
  
 ====== Linux ====== ====== Linux ======