meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
hw:server:hp [2023/07/13 10:52] – niziakhw:server:hp [2024/10/02 08:57] (current) – niziak
Line 4: Line 4:
     * Support for single/dual-rank 1333/1600 MT/s ECC UDIMM (unbuffered DIMMS)     * Support for single/dual-rank 1333/1600 MT/s ECC UDIMM (unbuffered DIMMS)
     * The server supports up to 32 GB (4 x 8-GB) for Unbuffered DIMMs     * The server supports up to 32 GB (4 x 8-GB) for Unbuffered DIMMs
-  * HP ProLiant ML310e G8 v2 - E3-1220v3 (2013 22nm), DDR3, 8GB iLO4 Adv B120i+  * HP ProLiant ML310e G8 v2 
 +    * E3-1220v3 (2013 22nm), DDR3 DDR3 UDIMM 8GB, iLO4 Adv B120i, P420i RAID (HBA possible as ciss devices) 
 +    * E3-1275L V3 (2014 22nm) 4C/8T (max 32GB DDR3), HPE P222 512MB cache + FBWC RAID: 0, 1, 5, 6, 10, 50, 60 
 +    * PCIe x16 (RAID CARD), PCIe x8, PCIe x8, PCIe x4 
 +  * HP ProLiant ML350 
 +    * huge tower
   * HP ProLiant ML110 G7 - E3-1220 (32nm, 2011), 4x HDD   * HP ProLiant ML110 G7 - E3-1220 (32nm, 2011), 4x HDD
   * HP ProLiant ML10 G9 - like normal tower PC - DDR4   * HP ProLiant ML10 G9 - like normal tower PC - DDR4
  
 +===== HP MicroServer =====
  
 +
 +  * Athlon II Neo N36L (1.3GHz) TDP 12W 
 +
 +  * HP N40L
 +    * AMD Turion II Neo N40L (1.5 Ghz) K625  TDP 15W 2C2T
 +    * ECC DDR3 UDIMM
 +      * Documented max: 2x4GB; Actual tested: 2x8GB non-ECC 
 +      * PC3-10600E Unbuffered DDR3 ECC @ 800MHz 
 +
 +  I recently replaced the original PSU with a pico-PSU 150-XT (with a 192W AC/DC brick)
 +
 +
 +===== HP Workstation =====
 +
 +  * HP Z240 SFF
 +    * 2x3,5" bay
 +    * 1x2,5"
 +    * 1x5,25 for CD-ROM
 +    * Intel Xeon E3-1225 v3 (22nm, 4C4T, 84W)
 +    * 16GB DDR3