meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
hw:server:matrix [2021/03/01 17:44] – created niziakhw:server:matrix [2021/04/08 19:35] (current) – niziak
Line 8: Line 8:
  
 1 communication (half-duplex channel) 1 communication (half-duplex channel)
 +
 +===== HPE M6510 =====
 +  * Model: 3PARA-ST1111
 +  * 24 x 2,5"
 +  * SAS 6Gb
  
  
Line 14: Line 19:
   * H800 controler with large disks support   * H800 controler with large disks support
   *    * 
-===== Dell PowerVault MD1000 AMP01 =====+===== Dell PowerVault MD3000/MD1000 =====
  
 +**!!! MD3000 has integrated RAID controller. **
 +  * Do not use it with PERC 6e or similar.
 +  * Use simple SAS5E or SAS6E HBA adapter
 +
 +
 +MD3000 vs MD1000:
 +  * the same enclosure.
 +  * MD3000 is a base module, contains EMM with raid support (AMP01-RSIM). 
 +  * MD3000i is a base enclosure like above but EMM supports two ethernet ports for iSCSI and one SAS expansion port.
 +    * seen as virtual device for dumb HBA
 +    * redundant connections (dual path)
 +    * 512 MB cache mirrored in each EMM
 +    * RAID is performed inside enclosure, so multiple device access is not consuming bandwidth on 3Gbps SAS port.
 +  * MD1000 is expansion module, contains simple dumb pass through EMMs (AMP01-SIM)
 +
 +
 +[[https://www1.la.dell.com/lc/en/corp/Storage/pvaul_md1000/pd.aspx?refid=pvaul_md1000&s=corp|MD1000]]
 +[[https://www.dell.com/support/home/en-la/product-support/product/powervault-md3000/docs|MD3000]]
 +
 +  * Enables mixing SAS and SATA drives in a single enclosure
   * 15 drives backplane.   * 15 drives backplane.
-  * Old 3Gpbs SAS enclosure +  * Enclosure modes: 
-  * To be use with perc5e and perc6e. 32 bit addressing limits disks to 2TB. +    * unified mode for direct connectivity to 15 hard drives 
-  * Specification capacity 15x2TB max.+    * split mode with dual EMMs providing a direct connectivity to drives 0 though 6 and a separate direct connectivity to drives 7 though 14. 
 +      * Possible bandwidth increase with soft raid using 2 x 3Gbps cabling 
 +      * Daisy chaining is not supported in split mode 
 +  * Old 3Gbps SAS enclosure 
 +  * To be use with PERC5e and PERC6e. 32 bit addressing limits disks to 2TB. 
 +  * Specification capacity 15 x 2TB max.
   * People reports that MD1000 backplane supports 3TB drives max.   * People reports that MD1000 backplane supports 3TB drives max.
  
Line 27: Line 57:
      * There is label on disk caddy "SAS" or "SATAu"      * There is label on disk caddy "SAS" or "SATAu"
        * SATAu caddy has interposer mounted, and disck is mounted a bit shifted to front to make space for interposer card        * SATAu caddy has interposer mounted, and disck is mounted a bit shifted to front to make space for interposer card
 +
 +Hints:
 +[[http://www.jebriggs.com/blog/2009/12/md1000-and-md3000-redundancy-matrix/]]
 +
 +
 +==== Enclosure Management Module (EMM) ====
 +
 +At least one EMM must be installed (in primary left EMM bay).
 +
 +
 +=== AMP01-RSIM ===
 +  * (R) - RAID controller ? with 512MB ram ?
 +  * one or two (multihost) IN ports (multiple standards, depends on product number) 
 +  * one SAS OUT port to next enclosure
 +  * one mangement ethernet port
 +    * default IPs: 192.168.128.101 and 192.168.128.102
 +  * one service port (6 pin mini-DIN - for factory use only)
 +
 +Part number:
 +  * M999D,59V6C,6706C,GY794 - Single host one SAS IN
 +{{:hw:server:pasted:20210408-121052.png}}
 +
 +  * 0P2GW4, MW736, CM669, MW726, X2R63, P809D,  - 2x iSCSI IN ethernet ports
 +{{:hw:server:pasted:20210408-120139.png}}
 +
 +
 +  *  0P2GW4, 0CM670 2x SAS IN (dual host) ports
 +{{:hw:server:pasted:20210408-120211.png}}
 +
 +=== AMP01-SIM ===
 +  * One SAS port ''IN''
 +  * One SAS port ''OUT'' to chain to next matrix
 +Part numbers: 
 +CK614
 +TH262
 +HM240
 +JT517 - SAS/SATA
 +{{:hw:server:pasted:20210408-115417.png}}
 +
 +